Ground Penetrating Radar Used to Locate Underground Water Line

  • GPRS-Locates-Private-Utility-Lines-for-Contractor-Phoenix-AZ.jpg
  • GPRS-Locates-Private-Utility-Lines-for-Contractor-Phoenix-AZ-02.jpg

Ground Penetrating Radar Systems, Inc. - GPRS - of Arizona was contacted a locate contractor to locate private utilities on a commercial site. The contractor was unable to complete the project without locating a high voltage 480 volt power line as well as an unknown sanitary / sewer / septic line.

Ground Penetrating Radar Systems, Inc. arrived on site and used both ground penetrating radar and radio detection / signal induction technologies to locate all utilities on site. This enabled the general contractor to continue safely excavate with confidence, while eliminating costly repairs by avoiding utility line strikes and breakages.

Ground Penetrating Radar services are a great tool to scan areas for identifying underground utilities that are public or private. GPRS also scans for objects below concrete surfaces such as post tension cables, rebar, and conduits, including PVC pipes. Ground penetrating radar can also be used to locate all kinds of underground utilities such as water, gas, electrical, communication, sewer, and other objects prior to digging or excavating. GPRS can use ground penetrating radar technologies as well as signal induction techniques in order keep you fully informed about what objects lie below the surface. Safety is a primary concern. Don’t dig, excavate, or cut concrete without knowing what lies below the surface.

GPRS can respond in very quick time to accommodate the time-frame of your project and keep you from production delays while keeping you safe. Please contact Ground Penetrating Radar Systems - GPRS to learn how we can assist with your next project.

GPRS has done many projects such as this in Phoenix, Tucson, Yuma, Flagstaff, Prescott, Kingman, and throughout the entire state of Arizona and performs GPR surveys throughout the United States. Contact Regional Manager, Nate Holscher at (480) 227-8614 or nate.holscher@gprsinc.com today to schedule an appointment for a free demonstration or if you have any inquiries for your next project.